Oneida Air Systems 7247180, Руководство пользователя

Страница: 17 / 28

15 oneida-air.com
FIG. 13
FIG. 14
13
Attach a Fine Dust Bin (M6) to each Filter (N)
with four J-Bolts (M4) and four Thumb Nuts
(M2) as shown in [FIG. 13].
14
To ground the filter, attach the ring terminal
on the braided ground wire from the Motor
Assembly (A) to a J-bolt (M4) on the Dual
Filter Plate (L) under the Thumb Nut (M2),
then attach the alligator clip to the filter’s cage
[FIG. 14].
Note: If you need to extend the wire, you can
use any 16 gauge copper stranded wire and
connect with wire nuts.
Assembly Instructions (Continued)