OneControl Salamandra Tail Loop, Руководство пользователя

Страница: 3 / 6

(11) SEND jack of loop
(12) OUTPUT
(15) TUNER
(16) 9V DC
(13) LOCK
(14) RETURN
Input "1"
Output
(10) INPUT
Connect this jack to input of guitar pedal.
Connect guitar here.
The programmer buttons will be disabled when the toggle switch is at the lock position.
Connect the jack to amplifier or other instruments.
This jack internally connects to input jack when MUTE switch is engaged, normally it
connects to a tuner.
5.5x2.1mm type, connects to DC negative center 9V/300mA power supply.
Connect this jack to output of guitar pedal.
3
(9) BANK/BUFFER display
When press the BANK switch, i
When a program is recalled by press PGM1/PGM2, it shows the buffer setup for 2 seconds,
then it turns to show the current bank number.
t shows the bank number.
2- Signal Chain
Guitar signal is fed to the input jack, goes into BJF buffer circuit, then it is posted
to loop stations 1"
" "2" "3" in sequence, each loop station could be set to loop1 or
loop2 or loop3 or thru, each loop can only be used once in the loop stations.
SARAMANDRA Tail Loop allows to change the connection order of guitar pedals.
BJF buffer
on/off
"2"
could be
loop1
or loop2
or loop3
or thru
"3"
could be
loop1
or loop2
or loop3
or thru
could be
loop1
or loop2
or loop3
or thru
loop stations