15
to be sprayed, including requirements for the use of personal protective equipment.
• Do not spray any substances whose hazard potential is not known.
• You may only spray coating materials such as paints, varnishes, glazes, etc. with a
flashpoint of 55 °C and higher without additional warning. (German classification of
coating material is hazard classes A II and A III, see material tin.)
• The device may not be used in workplaces covered by the explosion-protection regula-
tions.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
• Before working on the spray gun remove the power plug from the socket
• Never open the device yourself in order to carry out repairs in the electrical system!
• Do not lay the spray gun.
CAUTION : DANGER OF INJURY!
Never point the spray gun at yourself, at other people or at animals. When
working with the tool indoors as well as outdoors ensure that no solvent vapors
are sucked in by the spray gun.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual
risk factors. The following hazards may arise in connection with the power tool’s construc-
tion and design:
1. Damage to lungs if an effective dust mask is not worn.
2. Damage to hearing if effective hearing protection is not worn.
3. Damages to health resulting from vibration emission if the power tool is being used
over longer period of time or not adequately managed and properly maintained
.
Содержание 10029203
Страница 1: ...Farbsprühsystem 10029203 ...
