2. LED Output
This unit supports common anode connection LED products. The mark indicates the
common connection node. The peak output is 4 A per channel. please reduce load if the
main unit is overheating.
3. Remote Control
Please pull out the insulate part before using. The RF wireless remote signal can pass
through barriers, so it is not necessary to aim at the main unit when pressing a key. For
proper reception of the remote signal, do not install the main unit in closed metal parts.
The remote battery is 3 V CR2025 type. Please replace only with the same battery type.
Dynamic mode
Static Color
PWM Grade
Brightness Grade
Speed Grade
Demo mode
Working Voltage
Output Current
Remote frequency
Remote distance
19 modes
7 colors
256 levels
5 levels
10 levels
Yes
DC 12~24V
433.92MHz
3-way,peak 4A per channel
>30m at open area
CAUTION! Do not short circuit the LED output,this may
lead to permanent damage!
10.Demo Mode
Press this key will switch to Demo mode. At demo mode, it
will loop play 9 dynamic modes, each mode repeat 3 times.
Installing
1.Power Supply
3.Remote Controll
2.LED Output
This unit accepts DC 12V to 24V power supply. The inner pole
polarity is positive and sleeve is negative.Please select proper
power supply according to the LED application.
This unit support common anode connection LED products.
The mark' + ' indicates the common connection node.The
peak output current is 4A per channel,please reduce load if
main unit is overheating.
LED CONTROLLER
With RF Remote Control
Max Output:3x4A
RGB LED
12-24V
+
-
+
Common
Node
2
1
Please pull out the insulate part before using.The RF wireless
remote signal can pass through barrier,so it’s not necessary
to aim at the main unit when operate.For proper receiving
remote signal,do not install the main unit in closed metal parts.
The remote battery is 3V CR2025 type,please only replace
with same type battery.
-
+
Specification
CAUTION!
Do not short circuit the LED output. This may lead to permanent damage!
16
