c.
Set center speaker placement (phase control)
3 selections in center speaker setup page :
- Behind, center speaker is placed behind main speaker pair (typical behind 30cm)
- On line, center speaker is placed on the line of main speaker pair
- Front, center speaker is placed in front of main speaker pair (typical in front 30cm)
d.
Manage the surround signal source
Audio mode report show 5.1 surround ready, turn on all
surround speaker will have surround.
For 2.1 system, rear and channel audio will route to main
speaker automatically
Audio mode report signal source is 2.0 :
* TV broadcast and YouTube are correct
* BluRay 5.1 movie is incorrect, make sure your player channel down
mixing is disable, or the Blu-Ray disc audio setup is surround 5.1
If your TV digital audio output Dolby, means your TV setting is
correct.
Audio mode report signal source is LPCM 48/16 (TV stereo) :
* make sure your BluRay player digital audio output format is ‘Auto’
or ‘Bit stream’, don’t use LPCM output.
* make sure your TV digital audio output format is ‘Auto’, ‘bypass’ or
‘bitstream’, don’t use LPCM output
If your BluRay player connect to TV and TV output digital audio to
ONEbox, some BluRay player need to set audio output priority to
‘Optical’ to get access to select optical digital output format.
