2) Safety caution
The EHAMP08 can work in 110Vac or 230Vac according to internal jumpers
configuration. Operating voltage must be write on rear panel to avoid any incorrect use.
NOTE :
The EHAMP08 is a class 1 device, so it must be connected to earth.
Use only power cord witch include a ground wire.
Using the EHMAP08 on main without earth wire can be dangerous if insulation issue occur.
All metallic parts of the item are connected to the earth in order to avoid personnal injury.
DO NOT USE THE DEVICE ON MAIN WITHOUT HEARTH !
Never open it when power cord is connected !
Risk of electric shock !
3) General note & cleaning
The EHMAP08 can be use in clean and dry environment.
Do not put it near heat source and leave lot of space around to enough ventilate it's own heat.
For cleaning, only use a slightly damp duster.
Using detergent is not recommended, this can degrade the silkscreen and plastic parts.
EHAMP08 Manual fr v1.1
Page 4 / 9