One Touch H700B, Руководство пользователя

Страница: 24 / 58

FEB-9455 Main Board
18
Optional Second LCD Panel Display
An optional second LCD panel can be easily installed on Model H700B.
There are two standard pole heights that may be ordered, 150mm and 400mm.
The mechanical fitting of the second panel display is a very simple process.
Position the Model H700B onto its side.
Remove the 3 screws and Mounting Cover from the base unit.
Position the already assembled Second Panel Display, Pole and Holder to the base and
secure firmly with the 3 screws.
Now connect the Second Panel Display cables to the Power and VGA sockets on the
underside of the Model H700B unit. If you also ordered the second display Touch panel
option then connect this to the COM5 socket.
Note. CMOS BIOS settings should be altered to make COM5 use IRQ11, and boot
Display
„CRT+LVDS‟ should be enabled.
Dependent upon which operating system is used, drivers will have to be installed,
therefore please refer to the DVD that came with your Model H700B, or visit our website
at:
http://www.firich.com.tw/tech_drivers.htm