IPPS Intercom System
-6-
3.1 System Settings
Clicking the icon
“System Settings”, the system will enter the following
interface:
The number means the number of this extension with setting range 1~999;
the host number means the number for superior host of this extension.
Call Time: time limit for the call with the host.
Remark: the actual call time is subject to the minimum call time set by two
parties.
Code Stream: it depends on current network environment. The code stream
can be adjusted appropriately to ensure the fluency of video.
Call Modes: they can be divided into normal mode, IP direct call, SIP direct
call and building mode.
①
Normal mode: give an ordinary call to the center host;
②
IP Direct Call: In the mode of crossing VLAN, enable the mode of IP direct
call. The host’s IP address needs to be input.
③
SIP Direct Call: Inputting the account No,can call the corresponding SIP
terminal;
④
Building Mode: compatible with the indoor extensions of our digital
products.
Remark: Except for the first item, address settings are required for other three
modes. If no relevant settings pop up, please try again with compatible mode of
