One Tech 1B-GS8004, Руководство пользователя

Страница: 6 / 102

6
requirement.
Alarm
linkage
function
8ch alarm input ( alarm event mode can
be set normal open or normal close
selection),and turn-by-turn video loss
alarm, dynamic detection alarm, the
alarm device may be smoke detection
censer,
temperature detector, IR
detector.Possess 4ch relay switch
alarm output, flexible convenient and
fast to achieve alarm linkage and
lighting control at site.
They’re possess protective circuit in
Alarm input and alarm output port,
make sure the device not to damaged.
Com-munication
port
* Possess specific interface, achieve
alarm input and PTZ control;
* possess a standard Ethernet interface,
achieve the network remote
monitoring.
PTZ
control
* Support PTZ decoder through RS485
communicate
* scalable multiple decoder protocol,
easy to achieve to control the pan
driver
and speed dome camera
function.
Intelligent
operation
* mouse operation function;
* In menu for same setting and to
process shortcut copy operation
Chapter Two Hardware
2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk
○
1
Remove the screws on both ○
2 extracted from the next cover up
○
3 connect hard disk and mother board
sides of shell
Page 6 of 102