One Stop Systems, Inc. OSS-lanPCI-4GC User Manual
Rev. A
3
Installation and Removal
1. Power down the host system.
2. Open the chassis according to your system documentation.
3. Let the power supply cool down, if necessary.
4. Remove the OSS-lanPCI-4GC from the protective bag, observing proper ESD safety procedures.
Installing
the OSS-lanPCI-4GC:
1. Insert the OSS-lanPCI-4GC an open 3.3V PCI slot. The adapter is a universal-keyed 64 bit board.
2. Make sure that the adapter is well seated and tighten the screw.
3. Close the chassis according to your system documentation
4. Attach the ethernet cables.
5. Turn on power to the computer. Adapter installation is complete.
6. Reverse the above procedure to remove the boardSpecifications
Specifications
Electrical/Mechanical Specifications
Form Factor:
32/64 bit, 33/66 MHz PCI interface (PCI Rev 2.2), 3.3V Signaling,
Dimensions (H x L):
4.205 inches x 6.875 inches (107 x 175mm)
Front Panel Connectors:
Four RJ45 connectors
Front Panel Indicators:
2 rows of 4 LEDs
Power Consumption (designed to meet the following conditions
12.5W typical
Operating Environment (designed to meet the following conditions)
Temperature Range:
-5° to 60°C (23° to 140°F)
Relative Humidity:
5 to 90% non-condensing
Shock:
30g acceleration peak (11ms pulse)
Vibration:
5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
Agency Compliance Designed to meet, but not tested
Pending
