One Stop Systems, Inc. OSS-lanPMC-4GC User Manual
Rev. A
3
Installation and Removal
1. Power down the host system.
2. Open the chassis according to your system documentation.
3. Let the power supply cool down, if necessary.
4. Remove the host board from the system.
5. Remove the OSS-lanPMC-4GC from the protective bag, observing proper ESD safety procedures.
Installing the OSS-lanPMC-4GC
:
1. Press the OSS-lanPMC-4GC bezel into the cutout in the PTMC carrier I/O panel. The gasket around the OSS-lanPMC-
4GC bezel makes a tight fit to ensure an electromagnetic seal. Check that the bezel and gasket are pressed firmly into the
carrier I/O.
2. Press the OSS-lanPMC-4GC down onto the carrier so PN1–PN3 plug into JN1–JN3 on the PMC carrier.
3.
Install four screws to secure the board in place
Installation Diagram
.
Screw
OSS-lanPMC-4GC
OSS-lanPMC-4GC
PMC Carrier Card
PMC Carrier Card
Screw