2.
Insert the top Pole (4a) into the opening/inlet at the bottom of the Wire Basket (3), at the
bottom end of the “V” shape-see Figure 1.
Wire
Basket (3)
Top Pole (4a)
Bottom Pole (4b)
Stake (5)
Figure 1
3.
Slide the Sleeve (2) into the Fence (3).
4.
Slide the Fuel Can (1) into the Sleeve (2). Follow directions for using the Tiki Torch in the
Operation section of the manual located below.
Operation
Using the Tiki Torch
1.
Make certain that the Tiki Torch has been properly assembled as in steps 1 through 4, and
that all the fittings are secure.
2.
Insert the Stake (5) end of the Tiki Torch into the ground at a sufficient depth to assure
that the Tiki Torch will not move in wind or if accidentally bumped. The surface which
receives the Stake (5) end of the Tiki Torch must be clear of debris. The surface must be
flat, stable, fire retardant, and must be able to support the weight of the Tiki Torch.
3.
Remove the Fuel Can (1) from inside of the Sleeve (2). Unscrew the lid from the Fuel
Can (1). Unscrew the cap from the lid-see Figure 2.
4.
Move the wick so that about 1/4 “ extends beyond the rim of the Fuel Can lid. Make certain
that a significant portion of the wick remains below the lid to fit inside of the Fuel Can (1)-see
Figure 2.
5.
Fill the Fuel Can (1) with the appropriate Citronella or lantern oil. Screw the lid back onto the
Fuel Can.
6.
Slide the Fuel Can (1) into the Sleeve (2). Light the exposed end of the wick.
7.
When finished using the Tiki Torch, extinguish the flame with the use of the Cap. When
applying the Cap, keep fingers and hands clear of the flame. Never extinguish the flame with
your hands or fingers.
8.
Store the Tiki Torch in a safe location free of flammable material. Keep out of the reach of
children.
Fuel Can (1)
lid
cap
Wick
SKU 91536
Page 4
