Page 5
SKU 98109
For technical questions, please call 1-800-444-3353.
Bamboo Light at night or in a dark
location.
If the LED (9) is not lit, press the On/
8.
Off Button (6) again until it is in the
“ON” position-see Figure 1.
replacing the batteries
Battery
Cover (8)
Batteries (5)
Figure 2
Battery
Compartment (3)
1. Before performing any maintenance,
make sure the On/Off Button (6) is in
the off position.
Located on the bottom of the So-
2.
lar Light is a Battery Cover (8) held
in place with four Screws (10)-see
Figure 1. Place the Solar Light over
a working surface that is flat and
clear of debris so that you may eas-
ily retrieve the Screws if they are
dropped. Using a small screwdriver
(not included), remove each of the
Screws (10). Place the Screws (10) in
a secure location. Pull off the Battery
Cover (8).
Remove the Batteries (5) and replace
3.
with two new Batteries-see Figure 2.
Make certain that the batteries are
4.
installed with the positive and nega-
tive poles as indicated. Use Ni-Cad
Batteries only.
Replace the Battery Cover and
5.
thread in Screws.
inspection and
maintenance
to preVent
serious injury
From accidental
operation or electric
shocK:
before light inspection or
maintenance, make sure the
light switch is turned off, and
the unit has cooled
completely.
to preVent serious
injury From Failure:
do not use damaged
products.
beFore each use,
inspect
the general condition of the
Solar Bamboo Light. Check
for loose screws, cracked or
broken parts, and any other
condition that may affect its safe
operation.
When storing your Light indoors for
1.
more than 2 or 3 days, turn the On/
Off Button to “OFF”.
Store the Light in a dry location free
2.
of dust and debris. Make certain that
the Light is out of reach of children.
Storing the Light for prolonged pe-
riods may damage the light or de-
crease performance.
Keep the Solar Panel free from dirt
3.
and debris. A dirty Solar Panel will
keep the batteries from charging.
Clean regularly with a damp cloth.