Page 4
SKU 97411
For technical questions, please call 1-800-444-3353.
NOT DUMP unused chemicals on the ground or in the drain. Return unneeded
chemicals to the supplier, or a community disposal service.
Protect the Sprayer from damage.
12.
Do not allow the sprayer to be banged
around, crushed or improperly handled or stored.
If the tank is less than 1/2 filled,
13.
use less pressure or add more material to the
tank. Over pressurizing a partially filled tank will cause the Pressure Relief Valve
to pop open.
cAUtioN:
14.
This sprayer is constructed out of Polypropylene, Rubber, Aluminum,
Steel and Brass. Check the manufacturer’s compatibility list of any material you
want to spray before using that material in this sprayer. Some materials may
damage polypropylene, rubber, aluminum, steel or brass.
WARNiNG:
15.
This sprayer will create a mist or spray of whatever material is being
used. This spray may be breathed, over-sprayed or wind borne onto plants,
animals, property, children or other bystanders. Use precautions to prevent
breathing the sprayed material and to avoid over-spray. Cover plants or materials
that may be damaged by over-spray. Keep children, animals and bystanders out
of the area during operation. Do not use during windy conditions.
WarninG: the brass components of this product contain lead, a
16.
chemical known to the State of california to cause birth defects (or other
reproductive harm). (california health & Safety code 25249.5,
et seq.
)
General Safety
Do not use sprayer for other than intended use.
1.
Maintain labels and nameplates on the sprayer. These carry important safety
2.
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
The warnings, precautions, and instructions discussed in this instruction manual
3.
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SaVe theSe inStructionS.
