SKU 95453
For technical questions, please call 1-800-444-3353.
Page 4
assembly
note:
For additional information regarding the parts listed in the following pages, refer to
the
assembly diagram
at the end of this manual
.
opeRation
note:
This Umbrella is intended for use only with a heavy duty umbrella stand which is not
provided with this product. Order the Umbrela Stand fromm Harbor Freight Tools.
Ask for SKU # 94041, Granite Stand.
Before setting up and using, make sure the Umbrella Light Switch (4) is turned off.
(See Figure 3, page 5.
Place the umbrella stand (not included) on a flat, smooth surface. Choose a sunny
location, allowing enough space for the height and the diameter of the Umbrella. The
Solar Panel (5) at the top of the Umbrella (1) needs to be in a sunny location in order to
charge. Allow at least 8 hours of sunlight for charging before first use. Placing the Um-
brella under a tree or in a shady area will not allow the batteries to charge. See Figure 1.
caution: do not attempt to use this umbrella in moderate or high wind con-
ditions. doing so may cause personal injury and/or damage to the umbrella
and personal property.
To assemble, insert Lower Pole (2) with its threaded end upward, securely into a
heavy duty umbrella stand (not included).
Screw the Upper Pole (1), with its pre-attached upper umbrella assembly, securely
into the Lower Pole (2). Caution: DO NOT attempt to use this Umbrella in moderate
or high wind conditions. Doing so may cause personal injury and/or damage to the
Umbrella and personal property.
Hand-crank the Crank (8) clockwise in order to raise the hub above the
self-locking safety lock, thereby locking the upper umbrella assembly into
place. (See Figure 2, next page.) The Solar Umbrella is now ready for use.
1.
2.
3.
4.
5.
6.
Solar Panel (5)
Vent
Figure 1
