Page 4
For technical questions, please call 1-888-866-5797.
Item 57696
Installation Instructions
WARNING! TO PREVENT SERIOUS INJURY:
Verify that installation
surface has no hidden utility lines before installing light fixtures.
Main secondary wiring (landscape wire) is intended for shallow
burial - less than 6 inches (152mm). Low voltage cable shall:
a.
be protected by routing in close proximity to the luminaire or
fitting, or next to a building structure such as a house or deck;
b.
not be buried except for a maximum 6 inches (15.2 cm) in
order to connect to the main low voltage cable; and
c.
have the length cut off so that it is connected to a connector within 6
inches (15.2 cm) from a building structure, a luminaire, or fitting.
1. Lay out Light Fixtures in desired
locations. The first Light Fixture must be
installed at least 10 feet from power unit.
2. Unplug power unit (sold separately)
and lay out landscape wire
(sold separately) from power unit
along path of Light Fixtures.
3.
Installing:
WARNING - To reduce the risk of
FIRE OR INJURY TO PERSONS:
Keep away from combustibles.
a. Loosen soil as necessary.
b. Drive Stake with rubber mallet.
c. Attach Light Fixture to Stake.
4.
Wiring:
a. Open Wire Connector, place
landscape wire in Connector’s jaw.
b. Close Wire Connector so that
contact pins pierce both wires.
c. At end of run, cut off excess wire
.
5. Follow power unit’s instructions.
