Page 3
For technical questions, please call 1-888-866-5797.
Item 57681
5. Loosen the Knob and tilt the Light
assembly to obtain the best lighting
situation, then tighten the Knob.
6. Pivot the Solar Panel so that it
is angled directly at the sun.
7. Remove the protective film
from the Solar Panel.
8. Before operating the Solar
Spotlight, charge it for at least
5 hours in full sunlight with the
Switch set to the OFF position.
9. After the initial charge is completed,
set the Switch to the ON position.
10. Check Light operation at night or in
a dark location. If the Light is not on,
check the position of the Switch.
Note:
During the day, the Solar Panel converts sunlight into electricity, recharging
the battery. The amount of light the Solar Panel receives depends on placement of
the Solar Spotlight, geographic location and weather. If the weather is cloudy and the
panel did not receive a full charge, the Solar Spotlight may not achieve the full hours
of operating time. It will catch up on it’s own after two to three days of full sun.
Battery Replacement
1. Turn Switch to the OFF position
and remove Solar Panel.
2. Remove six screws from battery cover.
3. Carefully remove battery. Install new
battery of the same type and match
polarity. Do not pull the wires. Reattach
battery cover and tighten securely.
Battery
4. Reattach the Solar Panel.
5. Charge Spotlight for at least
5 hours in full sunlight with the
Switch set to the OFF position.
6. After the charge is completed, set
the Switch to the ON position.
7. Contains Li-Ion battery. Battery
must be recycled or disposed of
properly. Do not open, crush, heat
above 140° F or incinerate.
