OneRemote - www.oneremote.dk
4
Installation
The OneRemote PowerLink adaptor is easily installed.
1.
Connect the speakers with PowerLink cable(s).
Not included.
2.
Connect the B&O sound source with a PowerLink cable.
Not included.
3.
Connect the (non- B&O) AUX source using the appropriate cable.
Not included.
4.
Connect the mains adaptor.
Power supply 12 volt – Powerlink input - AUX Input.
Powerlink output.
Sound level balancing
If the sound level is too high or too low when the AUX source is on, it can be adjusted to level with the B&O
source, using the two adjustments on the side of the adaptor.
This adjustment sets the maximum volume for the AUX source too.
