One for All URC8820N, Руководство пользователя

Страница: 5 / 34

5
DEVICE
KEY
CONTROLS THESE DEVICES
CD
CD, Home Automation, CD/R (Recorders)
PVR
PVR/DVR Only Devices
AUD
Tuner, Amp, Misc. Audio, HTiB (Home
Theater In A Box)
AUX
Tuner, Amp, Misc. Audio, HTiB (Home
Theater In A Box)
Setting Up Your Components
This remote is preprogrammed at the factory to operate a Sony
TV, DVD and VCR, an RCA DirecTV Satellite box, a Sony Tivo PVR, a
Pioneer Receiver and CD, and a Sony Receiver (in the
AUX Mode).
To control devices other than the default brands, perform the
following steps; otherwise skip this section.
NOTE: For Combo Device control, see the next section.
1. Turn on a device (e.g., TV, VCR or DVD player) and, if applicable,
insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before
proceeding. Highlight or write down the codes and device you
wish to program before starting step 2.
2. On the remote control, press a device key once (i.e.,
TV
,
CBL / SAT , VCR , DVD , CD , PVR , AUD , or AUX ).
3. Press and hold SET until the LED (red light) blinks twice, then
release
SET
.
4. Use the accompanying code lists to locate the type of device
and brand name and then enter the first four-digit code for
your device. If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4
and enter the same code again.
5. Aim the remote control at the device and press
POWER
once.
The device should turn off. If it does not, repeat steps 2 through
5, trying each code for your brand until you find one that
works. If it still doesn’t work, try “Searching for Your Code.”
NOTE:
If the device does not have a
POWER
key, press the
(PLAY) key.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference, write down each working device code in
the following boxes:
TV Code:
Brand Name:____________________
VCR Code:
Brand Name:____________________
CD Code:
Brand Name:____________________
AUD
Code:
Brand Name:____________________