Web Site : http://www.oneforall.com
8
Web Site : http://www.oneforall.com
POWER. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find the one that operates your
TV.
NOTE: If you have tried all the codes listed for your
brand and your TV does not respond, try using the
search method found on page 22.
5.
Your Cinema 7+™ is now programmed to operate
your TV. Write your TV code in the boxes to the left
for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your TV, press the TV key first.
Setup Codes For TVs
Admiral
0093, 0179, 0180, 0016, 0047
Aiko
0092
Akai
0030
Alaron
0179
Ambassador
0177
Ampro
0751
Anam
0180
AOC
0019, 0185, 0003
Audiovox
0451, 0092, 0180, 0003
Baysonic
0180
Beaumark
0017, 0030, 0179
Belcor
0019
Bell & Howell
0154, 0016
Bradford
0180
Brockwood
0019
Candle
0056, 0030
Carnivale
0030
Carver
0054
Celebrity
0000
Cineral
0451, 0092
Citizen
0060, 0092, 0030, 0056, 0039
Clairtone
0185
Concerto
0056
Contec
0180, 0185
Craig
0180
Crown
0180, 0039
Curtis Mathes
0030, 0060, 0154, 0039, 0466, 1147, 1347
CXC
0180
Daewoo
0451, 0092, 0019, 0039, 0624
Daytron
0019
Denon
0145
Dumont
0017, 0019
Dwin
0720, 0774
Electroband
0000, 0185
Emerson
0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,
0282, 0039, 0624
Envision
0030
Fisher
0154, 0159
Fujitsu
0179
Funai
0171, 0179, 0180
Futuretech
0180
GE
0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347
Gibralter
0019, 0030, 0017
Goldstar
0019, 0030, 0178, 0039
Gradiente
0053, 0056
Grunpy
0179, 0180
Hallmark
0178
Harvard
0180
Hitachi
0145, 0151, 0056
Infinity
0054
JBL
0054
JCB
0000
tional details.
INSTALLING THE BATTERIES
Your Cinema 7+™ requires four (4) new AAA alkaline batter-
ies. To install the batteries:
1.
On the back of the Cinema 7+™, pull back on
the tab and lift the battery cover off.
2.
Match the + and - marks on the batteries to the
+ and - marks in the battery case, then insert
the
batteries.
3.
Press the battery cover back into place.
4.
Test the unit by pressing POWER. If the batter-
ies are inserted correctly, the red light will blink.
NOTE: Removing the batteries will not require you to repro-
gram your remote control because the Cinema 7+™ has
unlimited memory backup.
SETTING UP YOUR COMPONENTS
Programming the Cinema 7+™ to operate your TV:
NOTE: If you are trying to program a TV/VCR combination,
do not perform these instructions. Instead, follow the steps in
“Programming the Cinema 7+™ to operate your TV/VCR
Combo” starting on page 13.
Locate the brand name of your TV in the “Setup Codes For
TVs” section (starting on the next page), and write it in the
space below.
TV Brand: ________________________________
The brands are listed in alphabetical order with the most
popular codes listed first. You will use one of these codes to
program your Cinema 7+™ to operate your TV as follows:
1.
Turn on your TV.
2.
On the Cinema 7+™, press TV and release. Press
and hold SETUP until the red light blinks twice, then
release SETUP.
3.
Enter the first four-digit TV code listed for your
brand. If performed correctly, the red light will blink
twice when you enter the final digit.
4.
Aim the Cinema 7+™ at your TV and press
9
