TROUBLESHOOTING
PROBLEM:
If you own a satellite that uses code 0775 (Express
Vu and Echostar) and your exit key does not work,
perform the following sequence to activate this fea-
ture/function.
SOLUTION:
1. Press the
CBL/SAT
key
2. Press and hold the
SET
key until the red LED
blinks twice
3. Press
9-9-4
, the red LED will blink twice
4. Press
SET
and release (one blink on LED)
5. Press
3-3-6
6. Press the
EXIT
key, the red LED will blink twice.
The Exit key will now correctly perform the exit
feature/function on your satellite.
PROBLEM:
LED does not blink when you press a key.
SOLUTION:
Replace batteries with four new AAA alkaline
batteries.
PROBLEM:
LED blinks when you press a key, but home enter-
tainment component does not respond.
SOLUTION:
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet
away.
PROBLEM:
The unit does not control home entertainment devices
or commands are not working properly.
SOLUTION:
Try all listed codes for thecomponent brands being
set up. Make sure they can be operated with an
infrared remote control.
PROBLEM:
TV/VCR combo does not respond properly.
SOLUTION:
Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR code
for full operation.
PROBLEM:
Changing channels does not work properly.
SOLUTION:
If original remote control required pressing ENTER
to change channels, press
ENTER
on the remote
control after entering the channel number.
PROBLEM:
Tried “Search Method” and still could not find a
working code.
SOLUTION:
Clear the device key as follows: Press and hold
SET
until the LED blinks twice, then release. Next enter
9
-
9
-
2
. Then press the device key to be cleared twice.
Now repeat the “Search Method.”
PROBLEM:
CH +
and
CH -
do not work for your RCA TV.
SOLUTION:
Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM:
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
SOLUTION:
For power on, these products require programming
TV codes. For Sony, use TV code 0000 and VCR
code 0032. For Sharp, use TV code 0093 and VCR
code 0048.
PROBLEM:
Need additional information.
SOLUTION:
• Please visit : www.oneforall.com
9