WWW.ONEFORALL.COM
5
4
WWW.ONEFORALL.COM
Important notes:
- Most TV’s do not switch on pressing the POWER key.
Please try pressing a “number” key or the “TV-text
off” key to switch your TV back on.
- Some codes are quite similar. If your device does not
respond or is not functioning properly with one of
the codes, try another code listed under your brand.
- If your device’s original remote control does not have
a POWER key, press PLAY instead of POWER when
setting up your device.
- Remember to press the correct device key before
operating your device. Only one device can be
assigned to a device key. If your original remote
operates more than one device, you need to set up
each device separately.
The Search Method
If your device does not respond to the ONE FOR ALL 4 after
you have tried all the codes listed for your brand, try
searching for your code. The Search Method allows you to
find the code for your device by scanning through all the
codes contained in the memory of the ONE FOR ALL 4. The
Search Method may also work if your brand is not listed at all.
Example: To search for your TV code:
1
Switch your television on (not on standby)
and aim your ONE FOR ALL at your TV.
2
Press the
TV key
on your ONE FOR ALL 4.
3
Press and
hold down
the
MAGIC key
until the red LED underneath the POWER
key blinks twice (the red LED will blink once
then twice).
4
Press
9 9 1
. The red LED will blink twice.
5
Next, press
POWER
.
6
Aim the ONE FOR ALL 4 at your Television.
Now press
CH+
over and over, until your
Television turns off (everytime you press the
CH+ key the ONE FOR ALL 4 will send out a
POWER signal from the next code contained
in the memory). You may have to press this
key many times (up to 150 times) so please
be patient. If you skip past a code, you can
go to the previous code(s) by pressing the
CH- key. Remember to keep pointing the
ONE FOR ALL 4 at your Television while
pressing this key.
7
As soon as your television turns off, press
the
MAGIC key
to store the code.
Important notes:
- Most TV’s do not switch on pressing the POWER key.
Please try pressing a “number” key or the “TV-text
off” key to switch your TV back on.
- To search for the code for another device follow the
instructions above only press the appropriate device
key instead of TV during step 2.
- If your Video’s original remote control does not have
a POWER key, press PLAY instead of POWER during
step 5.
ok
ok
ok
ok
ok
Ecoline_3450_51_2008_17T_FS-2:Ecoline_3450/51_2008 18-02-2008 16:45 Pagina 5
