O
NE
F
OR
A
LL
6L U
NIVERSAL
R
EMOTE
C
ONTROL
WITH
L
EARNING
12 Programming Favorite Channel Scan
3.
To stop scanning channels at any time,
press any key once.
PROGRAMMING FAVORITE
CHANNEL SCAN
In the
TV
,
VCR
,
DVD
or
CBL/SAT
mode, you
can store a list of up to 10 favorite channels,
in any order, that will be immediately
scanned when you press
FAV
(see “Using
Channel Scan” on page 11).
NOTE:
Only channels of one mode can be
stored for Favorite Channel Scan.
1.
On the remote control, press
TV
,
VCR
,
DVD
or
CBL/SAT
once.
2.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
3.
Enter
9 9 6
. The LED will blink twice.
4.
Use the keypad to enter a favorite
channel number (e.g.,
031
). Then press
SET
once.
NOTE:
If the original remote control required
pressing an
ENTER
key to change the channel,
also press the
ENTER
key after the channel
number (e.g.,
0 3 1 ENTER
).
5.
If desired, repeat step 4 (in this
section) for each favorite channel to be
stored, up to a total of 10 channels.
NOTE:
If you try entering more than 10
channels, the remote control will
automatically exit programming.
6.
To exit programming, press and hold
SET
for 3 seconds. The LED will blink
twice.
USING LEARNING
The One For All 6L Universal Remote
Control with Learning (URC-6820 B00)
includes a Learning feature so you can add
functions that are unique to your home
entertainment devices (e.g.,
DVD EJECT
).
However, there are some considerations.
L
EARNING
P
RECAUTIONS
•
Your original remote controls must be
in working order for learning to work
properly.
•
Learned keys are mode specific, so
each one can store a unique function
for each mode.
•
Learned keys can be used in macros
(see “Using Macros” on page 9).
•
Do not use the following keys for
learning: Device Keys,
SETUP
,
FAV
, or
Record (
•
) Key.
•
Learning capacity is approximately 50
to 70 keys, depending on the code
being learned.
•
If both learned and keymoved
functions are assigned to the same key,
the last programmed function is
stored.
•
A learned function cannot be used as a
source for Keymover (see “Using
Keymover” on page 14).
•
Certain device codes are not learnable
including multi-frequency types, some
high frequency ones, and other
unusual formats.
•
For optimum learning, avoid high
levels of ambient light such as natural
sunlight or energy-efficient fluorescent
lights.
NOTE:
Please have your original remote
controls handy before programming learning.
Be sure to press each teaching key within 5
seconds of the previous entry. Otherwise, the
One For All 6L Universal Remote Control with
OFA 6L with Learning Owners Manual.fm Page 12 Thursday, February 17, 2005 1:10 PM