The Set top box protocol can be changed in the field to retune the RCU
to another STB using the following procedure:
• Press and hold key ‘Home’ and the relevant digit key together for a minimum
of 3 seconds, until the STB indicator LED blinks two times (of 500 ms each).
The new STB protocol is now programmed to non-volatile memory.
• Power on the STB and try out the dedicated STB buttons. If there is no
reaction on the STB, repeat the previous steps, for each code listed below.
1
Home + Digit2
Humax (eVision logo)
2
Home + Digit4
Airties
3
Home + Digit5
Kaon (Etisalat logo)
4
Home + Digit6
Kaon (eVision logo)
5
Home + Digit 7
Huawei
6
Home + Digit 8
Pace
7
Home + Digit 9
Humax (Etisalat logo)
Protocol
Keys
STB protocol
number
4
