3.
Enter the first four-digit TV code listed for your brand in the
“Setup Codes For TVs” section. If you perform this
procedure correctly, the red light will blink twice when you
enter the final digit of your code.
4.
Aim the
Cinema 5 at your TV and press POWER.
Your TV should turn off. If your TV does not respond,
repeat steps 2-4, trying each code listed for your brand
until you find the one that operates your TV.
5.
Your
Cinema 5 is now programmed to operate your
TV.
Write your TV code in the boxes to the left for future
reference.
Remember, if you want to use your
Cinema 5 to operate your TV, press the TV
key first.
SETTING UP YOUR COMPONENTS
Programming the
Cinema 5 to operate your TV:
Locate the brand name of your TV and then write it in the space below.
TV Brand:
Locate the brand name of your TV in the “Setup Codes For TVs” section. The
brands are listed in alphabetical order with the most popular codes listed first.
You will use one of these codes to program your
Cinema 5 to operate your TV.
To program the
Cinema 5 to operate your TV:
1.
Turn on your TV.
2.
Press TV and release. Press and hold SETUP until the Big
Easy HT Plus’s red light blinks twice, then release SETUP.
The SEL (Select) key selects options in your On-Screen
menus. The SEL key also controls the following functions
in other modes: RCVR mode = Surround Mode, DVD/LD
mode = Chapter.
The DISPLAY key operates the Display function of your
home entertainment components.
The PIP ON/OFF key accesses your TV’s Picture-in-
Picture feature. The PIP ON/OFF key also controls the
following functions in other modes: DVD/LD mode =
Subtitle On/Off,
CBL/SAT mode = View.
The SURROUND key operates the same as the Surround
On/Off key on your original remote. The SURROUND key
also controls the following functions in other modes: VCR
mode = Auto Tracking, DVD/LD mode = Disc, CBL/SAT
mode = Favorite Channel.
The MACRO key can memorize up to 15 keystrokes that
can be accessed in sequence with a single key press. The
key is not mode specific.
INSTALLING THE BATTERIES
Your
Cinema 5 requires four (4) new AAA alkaline batteries. To install the
batteries:
1.
On the back of the
Cinema 5, pull back on the tab
and lift the battery cover off.
2.
Match the + and - marks on the batteries to the + and -
marks in the battery case, then insert the batteries.
3.
Press the battery cover back into place.
4.
Test the unit by pressing POWER. If the batteries are
inserted correctly, the red light will blink.
NOTE:
1. Removing the batteries will not require you to reprogram your remote control
because the Cinema 5 has unlimited memory backup.
2. You are required to reset the clock after battery replacement.
Setup Codes For TVs
Abex
0032
Admiral
0093, 0179, 0180, 0016, 0047
Adventura
0046
Aiko
0092
Akai
0030
Alaron
0179
A-Mark
0003
Ambassador
0177
Anam National
0055
Anam
0180
AOC
0030, 0019, 0185, 0003, 0052
Archer
0003
Audiovox
0451, 0092, 0180, 0003
Baysonic
0180
Belcor
0019
Bell & Howell
0154, 0016
Bradford
0180
Brockwood
0019
Broksonic
0003
Candle
0056, 0030, 0186, 0046
Carnivale
0030
Carver
0054
Celebrity
0000
Cineral
0451, 0092
Citizen
0060, 0092, 0030, 0056, 0186, 0280, 0039,
0046
Clairtone
0185
Concerto
0056
Contec
0180, 0185
Craig
0180
Crown
0180, 0039
Curtis Mathes
0030, 0060, 0154, 0039
CXC
0180
Daewoo
0451, 0092, 0019, 0039
Daytron
0019
Denon
0145
Dumont
0017, 0019
Electroband
0000, 0185
Emerson
0463, 0236, 0180, 0019, 0154, 0177,0178,
0179, 0185, 0280, 0282, 0038, 0039
Envision
0030
Fisher
0154, 0159
Fujitsu
0179
Funai
0171, 0179, 0180
Futuretech
0180
GE
0047, 0051, 0451, 0021, 0027, 0055, 0178,
0282, 0135
Gibralter
0019, 0030, 0017
Goldstar
0019, 0030, 0178, 0032, 0039
Gradiente
0053, 0056
Grunpy
0179, 0180
Hallmark
0178
Harvard
0180
Hitachi
0145, 0151, 0038, 0056, 0032
Infinity
0054
Janeil
0046
JBL
0054
JCB
0000
JVC
0053
Kaypani
0052
KEC
0180
Kenwood
0019, 0030
Kloss
0024, 0046
