How to ARM and DISARM
Move LEFT stick down and to right as below picture shows. Hold for 5 sceonds.
You should see
LED (A)
change from blinking to solid.
Tips
●
Vibration can cause screws to work loose. Check for and tighten loose
screws as part of your regular maintenance schedule. A liquid thread lock
is very effective at combating this.
●
Never fly with a damaged propellor.
●
Get above ground effect. Above about 1metre you will find it much easier
to control.
●
Dont be shy to give it enough throttle to get above ground effect. From
then on all very small control stick movements.
●
We recommend not starting in Simple mode. Begin your flying in the basic
Stabilize mode.
●
Arducopter establishes its home position at the time of arming, so arm
your copter in the location you wish to designate as the home position.
onDrone Spider Quad Owners Manual rev 0514.2
