Onan DKHA Series, Руководство по установке

Страница: 8 / 24

2-1
2. Location and Mounting
LOCATION
The APU is designed for mounting up to the vehicle
frame rail on either side. See Pages A-3
through A-5. There must be clearance on the sides
of the APU for making exhaust, coolant, fuel, bat-
tery, AC and control connections, and access from
the front for removing the top and bottom access
panels to perform scheduled maintenance in accor-
dance with the Operator’s Manual.
MOUNTING
Use both lifting eyes on the engine head or a forklift
under the shipping pallet to raise the APU to its
mounting position. Raise the elevation of the APU
so that the mounting bolts pull straight across the
top and bottom of the frame rail flanges (Figure 2-1).
After all four bolts have been snugged up even and
straight, torque the nuts to 260 ft-lb (352 N-m).
Offset spacers (two) with hardware are available as
Kit 541-1425 if it is necessary to clear bolt heads
and other protrusions on the frame rail.
HARDWARE IN TOP MOUNTING
HOLES OF FRAME
HARDWARE IN BOTTOM MOUNTING
SLOTS OF FRAME
FIGURE 2-1. MOUNTING APU