ON Semiconductor MT9V126, Руководство пользователя

Страница: 3 / 5

MT9V126IA3XTCH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with each
jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pin 1
Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
JP3 CLK_SELECT
1 − 2 (Default) Connect to on − board oscillator
2 − 3 Connect to crystal oscillator
JP4 FRAME_SYNC
1 − 2 (Default) Normal operation
Open Connection to external trigger
JP5 SPI_SDI
2 − 3 (Default) Flash Mode
1 − 2 Host Mode
Open Auto-Configured Mode
JP6 LV 1 − 2 (Default) Video output does not have pedestal
Open Video output has pedestal
JP7 FV 1 − 2 (Default) Video output is not horizontally flipped
Open Video output is horizontally flipped
JP8 DOUT_LSB0 1 − 2 (Default) NTSC composite video output mode
Open PAL composite video output mode
JP9 TRST_N 1 − 2 (Default) Normal Mode
Open External connection for Test Mode