ON Semiconductor MT9V115, Руководство пользователя

Страница: 3 / 5

MT9V115EBKSTCD − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with each
jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pin 1
Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +VPP0
Open (Default)
For connection to external 8.5 V +VPP0 power supply for OTPM
P8 +2V8_VAA
1 − 2 (Default) Connects to on-board +2V8_VAA power supply
2 − 3 External power supply connection
P13 STANDBY
2 − 3 (Default) Normal mode
1 − 2 Standby mode
P14 MCLK_IN
2 − 3 (Default) Connects to on-board oscillator
2 − 3 Connects to XMCLK with P22
P17 +VDDIO
1 − 2 (Default) Connects to on-board +VDDIO power supply
2 − 3 External power supply connection
P18 +1V8_VDD
1 − 2 (Default) Connects to on-board +1V8_VDD power supply
2 − 3 External power supply connection
P19 +2V8_VDD_PHY_MIPI
1 − 2 (Default) Connects to pin 1 of P20
2 − 3 External power supply connection
P20 +VDD_PHY
1 − 2 (Default) MIPI output mode
2 − 3 Parallel output mode