ON Semiconductor MT9M114EBLSTCZH-GEVB, Руководство пользователя

Страница: 4 / 5

MT9M114EBLSTCZH − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P14, P15 EEPROM ADDR
P15 Closed,
P16 Open (Default)
EEPROM Address set to 0xA8
P15 Open,
P16 Open
EEPROM Address set to 0xAC
P15 Open,
P16 Closed
EEPROM Address set to 0xA4
P15 Closed,
P16 Closed
EEPROM Address set to 0xA0
P8 +2V8_VAAPIX
2 − 3 (Default) Connects to on-board +2V8_VAAPIX power supply
1 − 2 External power supply connection
P9 +0V4_VDD_SLVS
2 − 3 (Default) Connects to on-board +0V4_VDD_SLVS power supply
1 − 2 External power supply connection
P25 SADDR
1 − 2 (Default) I
2
C address set to 0x90
2 − 3 I
2
C address set to 0xBA
P32 CLOCK_SEL
3 − 5, 1 − 3 (Default) Master mode on-board oscillator
7 − 5, 9 − 10 Master mode Demo 2X Clock
6 − 5, 4 − 2 Slave mode clock from master sensor unit
P33 OE_N
1 − 2 (Default) Normal mode
2 − 3 Suspend state
P34 TRSTN
1 − 2 (Default) Normal mode
2 − 3 Test mode
P35 CONFIG
1 − 2 (Default) Normal mode
2 − 3 Test mode
SW10 RESET N/A When pushed, 380 ms reset signal will be sent to MT9M114
Interfacing to ON Semiconductor Demo 2X Baseboard
The ON Semiconductor Demo 2X baseboard has a
similar 26-pin connector and 13-pin connector which mate
with J3 and J4 of the headboard. The four mounting holes
secure the baseboard and the headboard with spacers and
screws.