ON Semiconductor MT9M113PACSTCH-GEVB, Руководство пользователя

Страница: 3 / 5

MT9M113PACSTCH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with
each jumper added.
Figure 5. Pin Locations for a Single Jumper.
Pin 1 is Located at the Leftmost Side and Increases as it Moves to the Right
Pin 1 Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
J1 CLK_SELECT 2 − 3 (Default) Connects to on-board oscillator
1 − 2 Connects to XMCLK from Demo 2X Board
J3 SADDR 1 − 2 (Default) I
2
C Address set to 0x78
2 − 3 I
2
C Address set to 0x7A
J5 STANDBY
1 − 2 (Default) Normal operation
2 − 3 Sensor standby mode
J6 TEST
2 − 3 (Default) Normal operation
1 − 2 Test mode
J7 GP[5:0] Open (Default) For connection to various sensor’s settings
J8 +VDD_DIS 2 − 3 (Default) Normal operation
1 − 2 Connects to on-board +VDDIO power supply
J9 +VDDIO 1 − 2 (Default) Connects to on-board +VDDIO power supply
2 − 3 External power supply connection
J10 +2V8_VAA 1 − 2 (Default) Connects to on-board +2V8_VAA power supply
2 − 3 External power supply connection
J11 +VDD_TX0 1 − 2 (Default) Connects to on-board +VDD_TX0 power supply
2 − 3 External power supply connection