ON Semiconductor MT9M034I12STMH-GEVB, Руководство пользователя

Страница: 3 / 5

MT9M034I12STMH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with each
jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pin 1
Pins 1 − 4
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Pin 1
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 VPP- Open (Default) For connection to +VPP power supply
P2 FLASH Open (Default) For connection to external flash
P3 SHUTTER Open (Default) For connection to external shutter
P4 +VDDIO 1 − 2 (Default) Connects to on-board +1V8_VDD power supply
2 − 3 External power supply connection
P5 +1V8_VDD 1 − 2 (Default) Connects to on-board +1V8_VDD power supply
2 − 3 External power supply connection
P6 +2V8_VAA
1 − 2 (Default) Connects to on-board +2V8_VAA power supply
2 − 3 External power supply connection
P7 +2V8_VDDPLL
1 − 2 (Default) Connects to on-board +2V8_VDDPLL power supply
2 − 3 External power supply connection
P8 +2V8_VAAPIX 1 − 2 (Default) Connects to on-board +2V8_VAAPIX power supply
2 − 3 External power supply connection
P11 TEST 2 − 3 (Default) Normal Mode
1 − 2 Test Mode