EVBUM2258/D
2
•
Connect to Hardware
♦
Select the “Connection” tab within the control GUI
♦
Click the Connect button
♦
The yellow indicator will change to green indicating
that a connection has been established. The system is
now ready to image. If there is a failure, the status
box will turn red displaying an error message with
more information.
Next Steps
Sensor Studio II provides a number of controls to evaluate
operation of the sensor, including image capture,
processing, and characterization.
Additional information on these controls is included in the
Sensor Studio II help system, which is available from the
HELP menu by selecting “SS2 and Python Help”.
For additional help in system setup, please contact
ON Semiconductor at www.onsemi.com/imagesensors or
by e-mail at [email protected].
LisAll brand names and product names appearing in this document are registered trademarks or trademarks of their respective holders.
