on networks N300R, Руководство пользователя

Страница: 37 / 138

N300 WiFi Router (N300R) User Manual
Safeguarding Your Network 2-17
May 2012
Configuring the WPS Settings
1. Log in to the router as described in “Logging In To Your WiFi Router” on page 1-1.
2. Select Wireless Settings under Advanced in the main menu.
These options are available under WPS Settings:
• Router’s PIN . The PIN is displayed so that you can use it to configure the router through
WPS (Wi-Fi Protected Setup). It is also displayed on the router’s label.
• Disable Router’s PIN . If the router’s PIN is disabled, you cannot configure the router’s
wireless settings with WPS. However, if your settings are already configured, you can still
add WPS-enabled wireless clients. The router might disable the PIN if it detects
suspicious attempts to break into your wireless settings; this can happen if the check box is
selected. You can enable the PIN by clearing the check box and clicking
Apply .
• Keep Existing Wireless Settings . This check box is automatically selected after WPS is
enabled to prevent unwanted settings changes, and is also selected if you have already
specified wireless security settings or your SSID without using WPS. When this check
box is
not selected, adding a new wireless client using the push button or the Add WPS
Client screen (see “Push Button Configuration” on page 2-14 ) changes the router’s SSID
and security passphrase. You might need to clear it if you are using certain registrars, such
as for a Windows Vista PC, to configure the router through WPS.
Figure 2-10