OHP 6000 User Manual
7
Settings
Power Switch
Location -- rear panel
Operation -- turns power on or off. When power is on, LCD is
illuminated.
Impedance Switch
Location -- rear panel
Operation -- An 8 ohm output is the default. Older phone systems may
require the 600 ohm setting.
Speaker Switch
Location -- right side, located next to the memory card slot.
Operation -- Slide the "SPEAKER" button to "ON" position to listen to
program playing from digital memory.
Speaker switch position has no
effect on "AUDIO OUT" playback.
Volume Control
L
ocation -- top face
Operation -- controls output level of "AUDIO OUT" jack. To adjust,
press the directional arrows. Set proper volume level by calling in from
a phone close to the unit (or cell phone) and having your call placed on
hold.
Select Control
Location -- top face
Operation -- allows user to scroll through tracks stored in memory.
Repeat Mode Button
Location -- top face
Operation -- allows user to set options for continuous playback
(
repeat one, repeat all, repeat all shuffle.
)
Play/Stop Button
Location -- top face
Operation -- begins and stops playback. Also used to save playback
settings (track, repeat mode and volume) so they can be retained
after a loss of power to the unit. To save setting, simply press the
play/pause button twice after playback settings are entered. For
more information on saving settings, see page 5 of this manual
under "Saving your settings."
