OHP 5500 User Manual
OHP 5500 User Manual
8
step
2
corded phones
3
Corded Phone Set-up
step
2
For true "hold button activation" of on-hold audio, each phone extension
requires a "hold music activator". Two activators have been included in your
package. If you require additional activators for other phones, contact your
reseller or visit www.onholdplus.com to purchase them on-line. Most phones
without activators are able to engage the hold music feature by pressing
**
(star key twice)
on the telephone keypad and then (optionally)
immediately pressing the
HOLD
button on the phone.
Telephone Extension Hold Music Activators (TEHMA)
Corded telephone connection
Remove coiled handset cord from base of phone.
Plug short phone cord (supplied) into the "hold music activator" (side marked "B")
and other end to phone base.
Plug end of coiled cord (connected to handset) into jack on the hold music activator
(side marked "A").
NOTE:
After connecting, if you can not hear the dial tone (handset sounds "dead"),
unplug the TEHMA and reconnect it in the opposite direction.
System test
(if test fails, see troubleshooting guide)
From any phone in the office with a "hold music activator" attached, dial an
outside phone number (a cell phone works fine).
Place the call on-hold using the
HOLD
button on the telephone.
Return to call and confirm that the on-hold audio was present on the line while on-hold.
Using the volume control on the rear of the unit, adjust the volume to proper level.
IMPORTANT:
Excessive volume may cause the on-hold audio to shut off during
playback.
Deactivating hold music manually
If, for any reason, the hold music is activated inadvertently, it can be deactivated by
pressing any key on your phone's dial pad.
Phones with "speakerphone" or "mute" functions
Telephones with "speaker phone" or "mute" function can fool the unit into thinking that
the line is on hold. If this occurs press any key on your phone's dial pad to deactivate the
music. Pressing a key will deactivate the feature for the remainder of the call.
4
3
2
1
3
2
1
A
B
TEHMA
P4/2
NOTE
The wiring in the handsets of
GE 9450 and GE 9460 phones is
reversed and your TEHMAs will
require a special crossover
cable to work.
Please contact IntelliTouch
at
800-839-7277
and these
cables will be rushed to you
at no charge.
GE 2-9450 & 2-9460 Phones
HoldTracks Audio CD
Light Contemporary
Classical
Bright Jazz
Easy Country
Restoring or Updating Player's Original Audio Content
Included with your OHP 5500 unit is a multi-track audio CD
with a choice of eight different styles. By using this
audio CD you can change or restore the original
audio that came prerecorded with the unit. Each
track is approximately 7 minutes and 30 seconds
in length.
Music Choices
1.
Light Contemporary
(originally recorded in player)
2. Classical
3. Bright Jazz
4. Easy Country
5. Corporate
6. Soft Jazz
7. Acoustic Piano
8. Holiday
Recording from the HoldTracks
™
Audio CD
1. Open cover
2. Insert CD
3. Close cover
4. Use the "track search" buttons to navigate to the desired track.
5. Press the SELECT button (to deselect a track, press SELECT button again)
6. Repeat steps 4 and 5 until you have selected all desired tracks or have
used the unit’s available memory.
7. Press the REC button to begin recording.
OPERATION – Once "record" button is pressed, the unit will begin
recording the selected tracks into the unit’s digital memory. During the
recording process, the audio being recorded to memory will be heard
through the speaker. Unit automatically switches over to "playback"
mode when recording is complete.