OV1021 | 7
User Guide: OV1021
Drill the pilot holes to the size recommended by the table top manufacturer.
Install the #10 x ¾" screws through the mounting plate into the table top.
ASSEMBLY INSTRUCTIONS
CENTERLINE OF TABLE TOP
End of life cycle: Once product is disassembled, all steel components can be recycled at your local
metal collector. For products with electronic components, see Disassembly Guide.
(FOR STANDING HEIGHT TABLES IN 48
"
AND 60
"
WIDTHS)
INSTALL CROSSBAR
Stand both legs up far enough apart to insert crossbars into their
corresponding slots in legs. Insert tab of crossbar into slot and
tap down on crossbar until set in slot. Repeat until crossbars
are firmly set in slots.
(FOR STANDING HEIGHT TABLES IN 48
"
AND 60
"
WIDTHS)
INSTALL LEGS TO THE TABLE TOP
Flip leg assembly over onto the table top. Center legs front to back and side to side on the bottom
of the table top
(See Illustration B)
. Mark the locations of the pilot hole on the table top.
2
3
ILLUSTRATION B
