![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261088.webp)
4-20
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
BANKLOAD/BANKSAVE commands
Specified bank data is loaded by the BANKLOAD command and saved by the
BANKSAVE command. Confirm the [READY] response after the command is sent to
perform file send/receive operations using the tools provided by the personal computer,
(for example, from Hyper Terminal) by XMODEM. The [OK] response is returned upon
successful completion of send/receive.
(1)
Parameter description
The following parameter can be set by the BANKLOAD and BANKSAVE commands:
(2)
Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command:
• BANKLOAD <Bank No.>
• BANKSAVE <Bank No.>
OK
Parameter
Setting Range/Output Range
Bank No.
1 to 16: BANK1 to BANK16
BANKLOAD 5
←
The settings of BANK5 are loaded.
BANKSAVE 5
←
The settings of BANK5 are saved.
BANKLOAD 6
←
The settings of BANK6 are loaded.
BANKSAVE 6
←
The settings of BANK6 are saved.
OK
←
Command execution ends successfully.
Command
Delimiter
Delimiter
Delimiter
Delimiter
Response
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Содержание ZUV Series
