![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261078.webp)
4-10
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
■
RS-232C connection
1.
Plug one end of the RS-232C cable into
the RS-232C connector of the controller.
2.
Plug the other end of the RS-232C cable
into the RS-232C connector of the
external device.
●
Connector pin assignments
The D-SUB9 female pin is used for the RS-232C connector.
Prepare a compatible connector.
Recommended part: XM3A-0921 (plug)
XM2S-0911 (hood)
●
Setting the communication specifications
Set the RS-232C communications specifications.
Match the communication specifications of the ZUV to those of the external device.
LOCK mode-[SYSTEM]--[COMM PORT]
Setting value
Range
DATA BIT
8BIT, 7BIT (default value: 8BIT)
PARITY
NONE, ODD, EVEN (default value: NONE)
STOP BIT
1BIT, 2BIT (default value: 1BIT)
BAUD RATE
9600, 19200, 38400, 57600, 115200 (default value: 38400)
DELIMITER
CR, LF, CR+LF (default: CR+LF)
Controller rear
Personal computer
5
4
3
2
1
9 8
7 6
1
FG (GND)
2
SD (TXD)
3
RD (RXD)
4
NC
5
NC
6
NC
7
NC
8
NC
9
SG (GND)
Signal Name
Pin No.
Description
Protective ground
Send data
Receive data
Not connected
Not connected
Not connected
Not connected
Not connected
Signal ground
Содержание ZUV Series
