Omron ZR-RX70, Руководство пользователя

Страница: 59 / 127

3
SETTINGS AN
D
MEASUREMENT
Setting Menus
ZR-RX70 User’s Manual
57
Setting Menus
When you press the [MENU] key during Free Running, the following menu screens appear.
The menu screens are classified by the tab for each setting item.
(1) AMP Settings
This menu is used to specify input signal-related settings.
<Analog Settings> <Logic and Pulse Settings>
Setting Selections available
Input Off, Voltage, Temperature, Humidity
Range [Voltage] 20, 50, 100, 200, 500 mV; 1, 2, 5, 10, 2
[Temperature] TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S
Filter Line, A5, 50, 500Hz
EU
(Scaling
settings) Function Off, On
Measured
value Upper limit value Numeric value input
Lower limit value Numeric value input
EU output
value Upper limit value Numeric value input
Lower limit value Numeric value input
Decimal point Select the display digit for decimal point (0 to 4).
Unit selection Current, length, area, volume, speed, acceleration, frequency, weight, power,
pressure, flow, temperature
Unit (Selections vary depending on the selected units listed in the above.)
User-defined unit Text input
Misc. Span
setting Upper limit value Numeric value input
Lower limit value Numeric value input
Annotation setting Text input (31 characters max.)
Waveform color setting Red/Green/Blue (RGB) 0 to 31 available for each color
Perform Auto Zero ADJ. Execute
Reset Auto Zero ADJ. Execute
AMP DATA TRIG OPT OTHR