4. Data Replay: Replaying Captured Data
38
ZR-RX40 Start Up Guide
4. Data Replay: Replaying Captured Data
You can replay and check the captured data.
The data has been captured to the <TEST> folder that was created in the USB memory device in Step 7 of
Section 2, "Setup". The file name is appended automatically, and therefore the name of the file that was
created is "Year/month/date-time_UG.gbd". The year/month/date and time are those that were in effect when
data capture started.
1
Selecting a file to replay
(a) Press the REVIEW key.
(b) Since the file you want to replay has the file name
that was appended automatically when the data was
captured, move the cursor to the [OK] button and
then press the ENTER key.
(c) The Replay screen opens.
(d) Move the cursor to check the captured waveforms,
date/time, and so forth. The SPAN/POSITION/
TRACE key can also be used in the Replay screen to
change the span, position trace, zone and other
displayed settings.
(e) Press the QUIT key to end the data replay operation.
A confirmation message is displayed. Press the
ENTER key.
(f)
Data replay ends, and the ZR-RX40 goes into the
Free Running status.
The above shows the basic ZR-RX40 operations.
%*)4172
52#064#%'
215+6+10
6+/'&+8
37+6
/'07
-';.1%-
75$&4+8'
#./%.4
(+.'
0#8+
%74514 &+52.#;
56#46
5612
'06'4
06
06'
4'8+'9
–
–(b)
–(b)
1
–(a)
–(a)
1
Stop replaying
㧫
='06'4?;GU =37+6?0Q
