The following describes how to attach the 35 mm wide DIN track by quick, easy operation.
①
Hook the hook on the connector end
onto the DIN track.
②
Push the Sensor Controller down onto
the DIN track until the hook on the I/O
cable side is locked.
Push down until you hear it snap into
place.
■
Part Names and Functions
When Sensor Controllers are used gang-mounted, attach the End
Plate (sold separately PFP-M) on the DIN track beforehand.
Always hook the hook on the connector end on the DIN track first.
Hooking the I/O cable end on the DIN track first may impair the
mounting strength of the DIN track attachment.
■
Dimensions
■
Mounting
■
Installing the DIN track
The following describes how to remove the Sensor Controller from the DIN track.
①
Pull the hook on the I/O cable end of
the Sensor Controller downwards.
②
Lift up the Sensor Controller from the
I/O cable, and remove it from the DIN
track.
■
Removing the DIN track
(1) T1 indicator
The T1 indicator lights When the judgement result of TASK1/TASK5 is [OK].
(2) T2 indicator
The T2 indicator lights When the judgement result of TASK2/TASK6 is [OK].
(3) T3 indicator
The T3 indicator lights When the judgement result of TASK3/TASK7 is [OK].
(4) T4 indicator
The T4 indicator lights When the judgement result of TASK4/TASK8 is [OK].
(5) LD ON indicator
The LD ON indicator lights while the Sensor Head is emitting a laser beam.
(6)ZERO-RESET indicator
The ZERO-RESET indicator lights when the zero reset function is enabled.
(7) TRIG indicator
The TRIG indicator lights while inputting the trigger signal.
(8) Control keys
The Control keys are for setting measurement conditions and information.
(9) Menu selector switch
This switch selects the setup menu.
STD : Standard menu.Select this mode when setting the minimum require
items for measurement.
EXP : Expert menu.Select this mode when making a more detailed setup.
(10) Mode selector switch
This switch selects the operating mode.
FUN : Select this mode when setting measurement conditions.
ADJ : Select this mode when adjusting the judgement threshold value.
RUN : Select this mode when performing measurement.
Output is performed only when the RUN mode is currently selected.
(11) LCD monitor
The LCD monitor displays setup menus and images captured from the sensor
head.
(12) Sensor Head connector
This connector connects the Sensor Head.
(13) Coupler
This coupler connects the Controller Unit when gang-mounting Sensor
Controllers.
(14) RS-232C connector
Connect the RS-232C cable when you are connecting the Sensor Controller to a
PLC or a personal computer.
(15) Voltage/current switch
The Voltage/Current switch selects between voltage output and current output.
Before operating this switch, make sure that the Sensor Controller is turned OFF.
Also, make sure that the load connected to "Analog output wire (co-axial)
- Analog GND wire" satisfies the rating (see I/O circuit diagram) of the set
state (voltage or current output) before turning the Sensor Controller ON.
Otherwise, the Sensor Controller may be damaged.
(16) I/O cable
The I/O cable connects the Sensor Controller to the power supply and external
devices, such as sync sensors or programmable controllers.
(17) USB port
Connect the USB cable to the USB port to connect to a personal computer.
(unit: mm)
Attach the ferrite core (provided with the Sensor Controller) to the I/O cable of the
Sensor Controller.
■
Attaching the ferrite core
■
How to Switch the Display Language to English
Only when power supply first time is turned on,The language switch menu is
automatically displayed.Please select[ENG(English)] or [JPN(Japanese)] with a right
and left key,and decide it with the SET key.
The content of the selection is reflected when starting.
*If you want to start language selection menu since the second times,Please turn on
power while pushing the menu key.
*Please two turns and install the cable.
End plate (sold separately)
PFP-M
DIN track (sold separately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
Hook on I/O cable
end
Hook on connector
end
Hook on I/O cable
end
• Notice for Korea Radio Law
A급 기기(업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서 판매자
또는 사용자는 이 점을 주의하시기 바라며,가정외의
지역에서 사용하는 것을 목적으로 합니다.
Insulation lock
Ferrite core
JPN
PLEASE SELECT
LANGUAGE
ENG
LEFT key
SET key
RIGHT key
MENU key
Suitability for Use
s
Omron Companies shall not be responsible for conformity with any standards,
codes or regulations which apply to the combination of the Product in the
Buyer’s application or use of the Product. At Buyer’s request, Omron will
provide applicable third party certification documents identifying ratings and
limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in
combination with the end product, machine, system, or other application or
use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
Oct, 2014
D
OMRON Corporation
Industrial Automation Company
Contact: www.ia.omron.com
Tokyo, JAPAN
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
Regional Headquarters
(16)I/O cable
(11)LCD monitor
(1)T1 indicator
(2)T2 indicator
(3)T3 indicator
(4)T4 indicator
(5)LD ON indicator
(6)ZERO-RESET indicator
(7)TRIG indicator
(13)Coupler
(14)RS-232C connector
(17)USB port
(10)Mode selector switch
(9)Menu selector switch
(8)Control keys
(12)Sensor Head connector
(15)Voltage/current switch
90
60
11.7 mm dia.
HEAT-RESISTANT PVC CORD
5.7 DIA., 16 CORES,
STANDARD LENGTH 2M
10.8
10
32.9
13
24.2
3.34
52.5
35.5
27.9
4.3
3.9
20.8
18.4