WX2B
WX2B
8
XW2B-20J6-3B
29.5
(1.16)
15.5
45
(1.77)
44.3
(1.74)
46
(1.81)
3.5
3.5
135 (5.31)
M3
20.5
Two, 3.5 dia. holes
6.2
7.62
7
7.5
2.8
34
39
2.8
Connection to Position Control PLC
CQM1H-PLB21 for 1- or 2-Axis Control
Connection to Terminal Block
The terminal signal name varies with the servo
driver. Refer to the Operation Manual of the servo
driver in use.
Identify the servo driver in use by writing the name
on the terminal nameplates provided. Affix the
nameplate to the terminal cover.
Servo side
CQM1 side
Note: The terminal block has a terminal pitch of 7.62 mm.
Terminal block (20 P)
with rotary cover
Common Common
Note: 1. When this signal is input, the output pulses
of the CQM1H can be input to the
high--speed counters directly.
2. Input this signal output to the CQM1H input
modules
3. The XB contact is used to turn the electro-
magnetic brake on and off.
4. Phase Z is an open collector output.
5. The open terminal must be left uncon-
nected.
6. 0 V and common terminals are connected
internally.
7. The suitable crimp terminal is R1.25-3
(round or fork type).
24 VDC
24
VDC
(see
note 2)
(see
note 1)
(see
note 1)
C
Q
M1H
Input
U
ni
t
