
EN
9
Notes:
• If no settings are made for more than 5 minutes, the
display will revert to the factory setting.
• The initial stride length value that blinks on the display
is an estimated stride length calculated from your height
setting.
Set the actual stride length based on the type of walking
you will do and your own physique.
• To measure the correct average stride length, divide the
total length of ten steps you walked by the number of
steps (e. g. 7.2 meter divided by 10 steps = 72 cm).
Adjusting the setting
1
Press and hold
and
at the same time.
The “lb” or “kg” flashes on the display.
2
Follow the procedure refer to “ACTIVATION AND
INITIAL SETTING” starting at A. Setting the unit of
measurement on page 8.
Notes:
• This does not delete measurement values stored on the
unit, including any stored today.
• If no settings are made for more than 5 minutes, the
display will revert to the current step count display.
7.2 m
2
3
10
1
Press 2 Sec.
or
NOT
FOR
PRINTING