manualshive.com logo in svg

Omron V740 Series, Руководство по эксплуатации

Поделиться
Скачать
Omron V740 Series Скачать руководство пользователя страница 6

 

V740 RFID READER 

NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.                                                                           REV. 1.1 

OPERATION MANUAL 

6 of 27

 

© OMRON CORPORATION 2004

 

 

4.  Plug the transformer provided with the Reader 

into the DC power input connector. Then 
connect the transformer to a power outlet. 

While the Reader is powering up, one green 
light will be on. After the Reader finishes its 
power-on self-test, approximately 30 seconds, 

the green light will pulse. The Reader is now 
ready for operation. 

 

  

 

Antenna Connection Options 

 

 

 
 

Reader Configuration 

In some cases, the application software may 
provide support for Reader configuration. If so, 
follow the instructions provided with the application. 

The following procedure describes how to 
configure the Reader directly from a network PC 
using the browser-based interface. 

The Reader is shipped to use DHCP by default but 
will fall back to the following static network 
configuration if it is does not get a DHCP lease: 

IP Address:  

10.0.0.101 

Subnet Mask: 

255.255.255.0 

Gateway: 10.0.0.1 

You must know the IP address and subnet mask 
settings for the network environment in which the 
Reader will be running or you may use Apple’s 
Rendezvous™ protocol (download Rendezvous™ 
from Apple’s website) to browse to it. 

1.  Exit any Reader applications that are running 

on the network. 

IMPORTANT:

 Running another Reader 

application while using the browser-based 
interface may cause a Reader error. If this 
happens, reboot the Reader or restart the 
system using the browser-based interface. 

2.  Verify that the Reader is operational.  All LED’s 

should be out except for the green power LED 
which should be pulsing. 

3.  Start a Java-enabled web browser from any 

network-enabled PC. This PC must be 
configured with an IP address and subnet 
mask compatible with the Reader’s settings. 
For example:  

IP address 10.0.0.10 
Subnet mask 255.255.255.0 

4. Browse 

to… 

http://mercury4/ (dhcp name) or 

http://10.0.0.101 

The 

V740 Reader/Writer

 browser-based 

interface to the tag Reader is displayed. 

V740-BA50C02-US 

2-Port UHF  

V740-BA50C22-US

4-Port UHF 

Содержание V740 Series




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды