Connection and Disconnection of Antenna Connector
Section 4-4
4-10
4-4
Connection and Disconnection of Antenna Connector
A single Antenna can be connected to the Controller through the V700-A4
□
Antenna Cable (sold separately), the standard length of which is 30 m
maximum.
Connection of Antenna Connector
Connection
1, 2, 3...
1.Hold and insert the connector into the port so that the point marked in
black on the panel of the Controller coincides with the point marked in
white on the connector.
2.Press the connector straight until the connector is locked.
Note Do not hold and press the ring of the connector, otherwise the connector is
not locked. Be sure to hold the connector.
Disconnection
Hold and pull the ring straight upwards.
Note Do not hold and pull the connector, otherwise the connector cannot be
removed. Be sure to hold the ring.
Caution
Do not pull the cable, otherwise the cable may break or be damaged.
Note Do not connect or disconnect the connector while the Controller is turned
ON, otherwise the Controller may malfunction.
Ring
Cable connector
!
Содержание V720 Series
Страница 1: ...Cat No S908 E1 2 ID Controller V720 series Electromagnetic Inductive RFID System 9 OPERATION MANUAL...
Страница 3: ...iv...
Страница 5: ...vi...
Страница 9: ...x...