![background image](http://html1.mh-extra.com/html/omron/v680-d1kp52mt/v680-d1kp52mt_user-manual_741386083.webp)
81
RFID System
User's Manual
Sec
Ins
ta
lling RF Tags
Installation
V680-D1KP54T
RF Tag Installation Direction
It is recommended that the RF Tag be mounted either by using the special V700-A80 Attachment or by
using an adhesive.
Installation by V700-A80 Attachment
1.
Insert the coin-shaped RF Tag into the Attachment.
The coin-shaped RF Tag has no directionality, so it can be faced in any direction.
Do not repeatedly insert and remove the RF Tag from the Attachment. Doing so an loosen the fit of the RF Tag and
break the Attachment clasps. In case it should become necessary to remove an RF Tag once it has been inserted, do
so by inserting a flat-blade screwdriver into the space between the Attachment and the RF Tag at the bottom of the
Attachment. Do not use bare hands to remove the RF Tag, or the RF Tag may be damaged.
2.
Use M3 screws to fasten the Attachment, and tighten the screws
to a torque of 0.3 to 0.5 N
⋅
m.
Installation by adhesive
Please select the adhesive matched to the bonded material. And defend decided dosage and usage.
And confirm and use the tidy fixation.
Because the material of RF Tag is PPS resin, the epoxy-based adhesives are recommended to bond-
ing to the metal and the rigid plastic.
The epoxy adhesives listed in the following table are recommended for the given temperature ranges.
If the part to be bonded is made of polyethelene, polypropylene, or a Fluorine Resin-based or
silicon-based resin, the above adhesive may not have sufficient.
Ambient operating
temperature
Product name
Manufacturer
-40 to 70
°
C
Two-part Epoxy-compound Resin:
TB2001 (main agent)/TB2105C (curing agent)
Three Bond Co., Ltd.
One-part Moisture-curing Elastic Adhesive
TB1530
Three Bond Co., Ltd.
−
40 to 110
°
C
Two-part Epoxy Resin: EP001
CEMEDINE Co., Ltd.
-40 to 150
°
C
One-part Epoxy Resin:
TB2285
Three Bond Co., Ltd.
Two-part Epoxy Resin:
TB2087
Three Bond Co., Ltd.
OMRON
㪭㪎㪇㪇㪄㪘㪏㪇
M3 countersunk screw
OMRON
V700-A80
Mounting hole dimensions
Two, M3
31
±0.2