Omron V530-R160E Скачать руководство пользователя страница 258

Страница: 258 / 294

256

Error

Codes

and Countermeasures

SE
CTION

V530-R160

Operation Manual

SECTION 9
Troubleshooting



QRCode explanatory diagram

E013

Decode Error
(Cell recognition error)

Codes were restored to correct errors, but not
decoded correctly.
Data of QRCode may be stained or damaged.

• Check the condition of the data part of the

code.

• Register the pattern again.

The registered pattern may not be the opti-
mum one.

• Increase the size of the code image.

The cell recognition coordinates may be
incorrect.

p.256

E020

Decode Error
(No definition error)

The printing is in a special format and not
defined for the V530-R160. (e.g. link mode)

• Change the printing format.

−

E200

Timeout Error

Decoding was not performed within the time-
out time.

• Make the reading angle in

Pattern set-

tings

Code settings

smaller.

• Lengthen the

Reading settings

Timeout

• Change the angle of vision, e.g. by increas-

ing the size of the code image.

p.137

p.112

Error code

Description

Countermeasures

A margin of 1 or more cells around the code is required.

Format information of the code. (four locations)

Finder patterns (Symbols in three corners)

An area other than 1. to 3. contains the data.

Содержание V530-R160E







































































































































































































































































































Результаты поиска

Содержание V530-R160E

Отзывы:

Omron V530-R160E, Руководство пользователя, Страница: 258 / 294

Результаты поиска

Содержание V530-R160E

Отзывы: