6-1
Section
SET (Setting) Mode
137
6-1-8
Display Settings
1. Read QR (Normal)
1. Read QR (Pattern)
Display Settings
Display Settings
1. Read DM (Normal)
1. Read DM (Pattern)
Display Settings
Display Settings
Set the contents displayed in MON (monitor) mode and RUN
mode. The processing time will increase in proportion to the
number of display items selected.
Reading Data
:
ON
j
Detail Data
:
OFF
j
Finder Pattern
:
ON
Cell Position
:
ON
j
Font Size
:
1
j
A
B
C
E
D
1
Select whether or not to display reading data on the screen.
(The default setting is ON.)
2
Select whether or not to display detailed data on the screen.
(The default setting is OFF.)
If turned ON, information such as detailed information about
codes and pixels per cell, etc. is displayed.
3
Select whether or not to display finder pattern positions on
the screen. (The default setting is ON.)
4
Select whether or not to display cell recognition positions on
the screen. (The default setting is ON.)
Note When
Function Settings/Cell Verify is set to ON,
this function is invalid.
5
Select the font size of reading data to be displayed on the
screen. (x1/x4; Default setting is x1.)
When the displayed data exceeds the number of letters giv-
en below, the font size is automatically set to x1.
•
64 or more letters
(x4 when reading accuracy or data history function is ON.)
Data other than reading data (detailed data etc.) is dis-
played with x1 font size regardless of this setting.
Содержание V530-R150E-2
Страница 1: ...Cat No Z140 E1 2 V530 R150E 2 V530 R150EP 2 OPERATION MANUAL 2 Dimensional Code Reader Fixed Type ...
Страница 90: ...5 3 Section STEP 2 Setting Reading Conditions 78 11 Press the ESC Key once more to return to MON monitor mode ...
Страница 236: ...Cat No Z140 E1 2 Note Specifications subject to change without notice Printed in Japan 1100 1M A Authorized Distributor ...