Omron V530-C300E Скачать руководство пользователя

Страница: 186 / 205

170

Error Codes and Countermeasures

Section 9-2

9-2-3

Data Matrix Reading in Pattern Mode

Error Code

Description

Countermeasures

E160

Timing pattern detection
error 1 (No finder patterns
were detected for models 1
or 2)

No timing pattern was detected.

• The timing pattern may be stained or dam-

aged. Check the condition of the timing pat-
tern.

• The correlation value may be too high.

Decrease the correlation value.

• A model may not be registered. Confirm that

a model is registered.

• A model may have been registered with an

incorrect code size. Re-register the model.

E161

Timing pattern detection
error 2 (32 or more finder
patterns were detected for
models 1 or 2)

Too many timing patterns (32 or more) were
detected.

• The correlation value may be too low.

Increase the correlation value.

E170

Finder pattern detection
error 1 (No finder pattern
was detected for model
ABC)

No finder pattern was detected.

• The finder pattern may be stained or dam-

aged. Check the condition of the finder pat-
tern.

• The correlation value may be too high.

Decrease the correlation value.

• A model may not be registered. Confirm that

a model is registered.

• A model may have been registered with an

incorrect code size. Re-register the model.

• Model registration may not have been per-

formed in the optimum way. Re-register the
model with reference to page 65.

E171

Finder pattern detection
error 2 (32 or more finder
patterns were detected for
model ABC)

Too many finder patterns (32 or more) were
detected.

• The correlation value may be too low.

Increase the correlation value.

• Model registration may not have been per-

formed in the optimum way. Re-register the
model with reference to page 65.

E172

Finder pattern detection
error 3 (Relative positioning
is incorrect for model ABC)

3 points of the finder pattern were detected.
However, the relative positioning of the patterns is
incorrect.

• The finder pattern may be stained or dam-

aged. Check the condition of the finder pat-
tern.

• The correlation value may be too high.

Decrease the correlation value.

• Model registration may not have been per-

formed in the optimum way. Re-register the
model with reference to page 65.

Содержание V530-C300E














































































































































































































Результаты поиска

Содержание V530-C300E

Отзывы:

Похожие инструкции для V530-C300E

Бренды по названию

Популярные бренды

Omron V530-C300E, Руководство по эксплуатации

Результаты поиска

Содержание V530-C300E

Отзывы:

Похожие инструкции для V530-C300E

Бренды по названию

Популярные бренды